|
|
| 
|
1999-2008
CK 1500 Silverado/Sierra
Back in 1990
we started making one of the first lift systems available for 2WD
Chevrolet C1500 trucks. Within several years, multiple suspension
systems were available. Following Chevrolet's complete redesign
of the Silverado / Sierra suspension in 1999, Fabtech has again
produced some of the finest suspension systems, taking advantage
of the performance capabilities built into the newer Silverado
/ Sierra Trucks.
|
 |
2" Leveling
System
For 07-08 GM C/K1500 Truck/SUV
2WD/4WD
This system features machined coil spring spacer mounts designed
to level the vehicle front to rear. Utilizing the stock front coil
springs provides a factory like ride with increased height and a
quick installation. |
| 2" Leveling System |
Quantity |
Order |
 |
3" Spindle System
99- 06 Silverado/Sierra C1500 6
Lug 2WD w/ Coil Spring Front Suspension
Fabtech's 2 Wheel Drive lift spindles not only increases the vehicles
height, but provides increased front-end ground clearance while providing
a stock like ride. Lift spindles are compatible with Fabtech's Performance
Suspension systems or may be installed on stock suspensions. The one-piece
cast design directly replaces the factory units for a quick easy,
no weld installation. All spindles are engineered to accept factory
ball joints and feature a press in axle snub design for superior strength
and longevity. The S10 spindle can be installed without the need for
costly wheel spacers. All Fabtech spindles will accept stock tires
and wheels. |
| 3"
Spindle System (Notes: 1, 5) |
Quantity |
Order |
 |
7" Performance Crossmember System for
99-06 C1500 2WD Extra Cab Pickup w/ Coil Spring Front Suspension
The latest addition to our 2 Wheel Drive line is the 7" Performance
System for late model C1500 GM trucks. This system uses our proven
crossmember and steering knuckle technology found in our 4 Wheel Drive
IFS systems. The factory upper control arm remains in the stock frame
pocket attaching to an extended length cast steering knuckle. An extended
length coil spring provides increased ride height for clearance of
315/75R16 tires on 16x8 wheels. |
| 7"
Performance Crossmember System (Notes: 2,
5, 6) |
Quantity |
Order |
 |
7" Performance
Crossmember System for
04-06 C1500 2WD Extra Cab Pickup w/ Torsion Bar Front Suspension
In 2004 GM replaced coil springs with torsion bars on some models,
on the front suspension of their C1500 trucks. Fabtech offers a 7"
Performance System for this new suspension platform that utilizes
our proven arched lower control arm crossmembers and extended length
steering knuckles. System includes billet sway bar links, impact
struts and more. |
| 7"
Performance Crossmember System (Notes: 1,
5) |
Quantity |
Order |
|
7" Performance
Crossmember System for
04-06 C1500 2WD Crew Cab Pickup 6 Lug w/ Coil Spring Front Suspension
The latest addition to our 2 Wheel Drive line is the 7" Performance
System for late model C1500 GM trucks. This system uses our proven
crossmember and steering knuckle technology found in our 4 Wheel
Drive IFS systems. The factory upper control arm remains in the stock
frame pocket attaching to an extended length cast steering knuckle. |
| 7"
Performance Crossmember System (Notes: 1,
5) |
Quantity |
Order |
Footnotes:
1. Larger tires cannot be installed on OEM wheels.
2. Impact struts not Compatible w/ 1999 models.
3. For use with coil spring crossmember system only.
5. If vehicle is equipped with factory 17” wheels,
must use 17” or larger aftermarket wheels.
6. Will not fit 4Dr. Crew Cab Models
|
