vAD SmartBox R & SmartBox v5

vAD SmartBox R & SmartBox v5 for Dodge 24v 5.9L Cummins

We currently offer two versions of van Aaken Smartbox™ for this model which are known as the van Aaken SmartBox™R and the van Aaken SmartBox™V5.

Both these van Aaken SmartBoxes™ increase power by 60hp and torque by 159lbs ft at 2000rpm.

The extra power is achieved by carefully increasing the fuel delivery and advancing the injection timing. Advancing the injection timing also serves to reduce Exhaust Gas Temperatures (EGT's) which remain close to stock levels with the van Aaken SmartBox™ fitted.

Both the van Aaken SmartBox™R and the van Aaken SmartBox™V5 have been specifically designed to be fitted (and removed) within minutes. They use high quality plugs to mate in with the original system.

To install the van Aaken SmartBox™R, simply unplug the loom from the back of the Diesel injection pump and plug the van Aaken SmartBox™R in between the pump and the loom. It also has a connection into the map sensor.

he van Aaken SmartBox™V5 has been designed for those who prefer not to unplug the loom from the back of the Diesel injection pump: it connects into the diagnostic plug and into the map sensor.

A built in boost delimiter is included on both the van Aaken SmartBox™R and the van Aaken SmartBox™V5 for full adjustability. No engine seals are broken during the fitting of either the Aaken SmartBox™R or the van Aaken SmartBox™V5 and you do not have to cut wires or feed wires through the bulkhead unless you wish to fit an optional power level switch.

In both cases, although fitting is simple, full easy to follow fitting instructions describing mounting and plugging the units in are supplied.

Available for all Cummins 5.9L ISB engines as fitted to the 1998.5-2002 Dodge Ram

Greatly improved Power and Torque
Better Throttle response and acceleration
Built in Boost De-Limiter
Connects at Vehicle Diagnostic Plug or directly in to the Diesel injection pump loom
Simple Plug-in-Plug-out fitting and removal
Tuned for excellent driveability with maximum power
Advanced Injection Timing helps give lower EGT's

*This product is no longer available*

van Aaken Developments will never use a cookie-cutter approach to building power and performance. That's why we offer two plug-in module options for the 1998-2002 5.9L 24v Cummins engine - the SmartBox R and SmartBox V5. While both operate similarly, there are subtle differences in tuning injection quantity and injection timing, however both are carefully remapped across the engine speed and load range to provide an ideal combination for maximum power across the rev range.

The van Aaken SmartBox™ R, plugs into the electronic section of the pump and the MAP sensor and has a built in boost de-limiter. This module is designed to increase horsepower and torque performance for vehicles with the 24v 5.9L Cummins engine, including RV's.

The van Aaken SmartBox™ v5, also developed for the 24v 5.9L Cummins engine, connects at the vehicle diagnostic plug and the MAP sensor. A selection of adaptors supplied with the unit enables fitting for most combinations of vehicle diagnostic plugs and MAP sensor plug shapes. The built in boost de-limiter, via the MAP sensor, gives the user the option to raise the vehicle boost pressure mechanically without the worry of upsetting the vehicle ECU. The advanced injection timing helps to keep exhaust temperatures down to near stock levels, while improving throttle response and power output.

*Fuel economy is probable with this module depending on many factors including, driving style and acceleration speed.