|
|
|
|
All the features of the TruXedo® Lo Pro QT screen-printed with the
famous Harley-Davidson® Bar and Shield logo.
- TruXedo's Lo Pro QT Harley-Davidson Tonneau Cover is custom-built for your specific year, make and model
- Innovative cam-lock clamp system lets you install or remove the cover in just 5 minuets
- Helps increase fuel efficiency thanks to the low-profile, aerodynamic design
- Extra-wide Velcro side straps deliver a solid seal every time—no fumbling with clumsy snaps
- Continuous rubber seals at both ends of the Lo Pro QT keep your gear clean and dry
- TruXedo's innovative corner sealing system keeps leaks from finding their way to your bed
- Your tarp stays tight from -20° to +120° with the patented automatic tension control
- Quickly roll the Lo Pro up and out of the way—load bikes and gear without removing the cover
- Accommodates a variety of bed caps, liners and rails thanks to the universal adjusting clamps and inside-the-rail mounts
- The Lo Pro tonneau automatically secures when latched at rear
- Your TruXedo Harley-Davidson Lo Pro tonneau tarp and frame are backed by a Lifetime Warranty
Whether you ride a blockhead or a bobber, show your Hog pride with the TruXedo Lo Pro QT Harley-Davidson Tonneau Cover. This is the same TruXedo tonneau that installs in minutes, improves fuel economy and offers all-weather cargo protection. Only this one sports the famed Harley-Davidson bar and shield!
Velcro side closures, an automatic latch and rubber seals at both ends keep your tarp tight and your gear secure. Aluminum bows and the patented, automatic tension control eliminate sag—no matter what the temperature. And, the industrial-strength, vinyl-coated leather-grain tarp has the Harley logo printed right on top.
The Lo Pro mounts securely with easy-to-use cam-lock clamps—no tools needed. You can take it off as fast as it went on and the clamps work with most bed rails and caps. Plus, the sleek profile rises less than an inch above your bed for a clean look. Best yet, TruXedo goes whole hog and backs the frame and tarp with a Lifetime Warranty.
Click here for installation
Information.
|
| TruXedo Lo Pro
Features: |
|
|
|
|
Superior
Fastening.
Velcro® brand loop measures a full 1-1/2 inches wide, for superior
fastening the entire length of the bed rail. No snaps or adhesives
to fail. |
Velcro® brand "floating
hook" technology.
Hook moves - or floats - on the rail. Works with tension control
system to keep the cover tight, even when it's closed! |
Spring-loaded
tension control system.
Two compact stainless steel plungers automatically keep the cover
tight in fluctuating temperatures. Works in all climates. |
Seals
guard against the elements.
Exclusive corner seals and weather seal on all four sides help keep
the elements out. |
| TruXedo Lo-Profile
Operation: |
|
|
|
Step
1:
Release driver's side latch to unlock the rear header. |
Step
2:
Rear header and bows roll up with cover, forming an even compact
roll. |
Step
3:
Entire cover self-stores at front of bed with two security straps.
|
|
FREE GIFT WITH PURCHASE
FOR A LIMITED TIME ONLY
Order any TruXedo Tonneau Cover & we'll throw in a Tailgate Seal FOR FREE!
That's a value of over $28.49 at NO extra cost to you! |
Note: To ensure that you
receive the correct part for your vehicle please complete the checkout
form in its entirety. |
| Chevrolet & GMC |
Quantity |
Order |
| Mitsubishi |
Quantity |
Order |
| TruXedo
Lo-Profile Installation: |
|
|
|
Step
1:
Clamp side rails onto inside lip of truck bed. |
Step
2:
Install header guides into front header, set cover
assembly on rails behind cab, slide header guides
onto side rails and tighten. |
Step
3:
Unroll cover toward tailgate, rotate header into
header stops and press down to lock toggle into header.
Pull cover over rails to adhere Velcro® brand
fastening system along rails.
|
Easy
Clamp-on Installation
Components come pre-assembled and ready for quick
installation. There is no metal-to-metal contact,
*No drilling required, no damage to your truck. |
TOP^
|
|
|
