Long Arm Series
Skyjacker 7" Long Arm
Series Kits & Systems
For 94-99 1/2 & 3/4 Ton
Ram 4WD - V8 Engine and 2.5" Wide Rear Springs
7" Systems Skyjacker® has gone to great lengths to give you a Long Arm Lift System for the 1994-'01 Dodge 1/2, 3/4 & 1 Tons. This 'Bolt-On' kit requires No Welding and clears 38s with no other modifications necessary. The Flex Series Long Arm design maintains proper geometry through the travel cycle.
- Heavy-Duty Crossmember Strengthens the Support Brackets
for the Lower Arm Attaching Point and Allows Transfer Case & Rear
Drive Shaft Clearance.
- Re-Indexing Ring (Patent Pending) Rotates
the Transfer Case Down for Proper Front Drive Shaft Angle.
- New Track Bar with Polyurethane
Bushings at the Frame End with a Teflon® /
Lubricating & Self Sealing
Rod End at the Axle Mount
- Replacement Adjustable
Track Bar Relocation Bracket Includes an Eccentric Alignment
Bushing to Fine Tune the Exact Angle You Need for Your
- Option of Coil Springs & Softride® Front
Dual Shocks or the Ultimate in Performance... The Platinum
Series Coil-Over Conversion.
- Whether a Diesel, V8 or V10, 1/2,
3/4 or 1 Ton, You Get a Full 7 Inches of Lift.
7" Class I Kit w/ Add-A-Leafs
7" Class I System w/ Replacement