|
|
|
Remote Control
|
Built on Roll-N-Lock's time-tested M-Series platform, the new Roll-N-Lock E-Series embodies all of the quality and design characteristics of the M-Series, yet incorporates several revolutionary enhancements. From its easy clamp-on installation, laminated cover construction and patented tailgate locking mechanism, to its ultra-compact housing size and rugged durability, the new Roll-N-Lock E-Series has all the benefits of the M-Series, with the added convience of a push-button remote control!
- Cover construction of marine grade bi-laminate vinyl over .040 gauge interlocking aluminum slats
- Hinged housing lid for easy access to the housing for quick inspection or routine maintenance
- Smallest housing in the category, measuring only 6.25", 7.25" or 8.25" deep, depending on the application
- Internally mounted, tubular electric motor over torsion spring drive system
- Motor is fast and quiet averaging only nine seconds to open or close the cover
- Remote control operation
- Innovative "Drive Converter" allows for instant conversion from electric to manual operation in the event of power loss
- Built-in remote-operated cargo light with automatic shut-off
- Aluminum Cargo Shield protects against shifting cargo
- Built-in tailgate lock automatically locks the tailgate when the cover is closed
- Can be shipped by FedEx or UPS.
|
 |
 |
 |
 |
| Drive Converter |
Autolock Security |
Compact Housing |
Automatic Light |
Note: To ensure
that you receive the correct part for your vehicle please complete the
checkout form in its entirety.
| Roll-N-Lock E-Series Tonneau |
Quantity |
Order |
1. Roll-N-Lock unit impedes operation
of the OE Exteder option.
2. Requires drilling holes to mount tracks.
3. OE cargo management system must be removed & discarded
for installation of Roll-N-Lock unit. Consider Cargo Manager
option.
4. Needs eight (8) #2 bed clamps.
5. OE plastic tailgate cap must be replaced with 1/16" thick
aftermarket tailgate cap.
6. Special Order Only. Must provide exact bedrail length at
time of order.
7. Uses additional flanges (included) that screw to the inside
edge of the OE bed rails. Allow additional 15 min. for installation.
8. Ships in two boxes. Additional shipping charges may apply.
9. OE chrome bedrails must be removed and descarded. Mounting holes will be visible. Consider replacing OE bedrail caps.
10. OE tailgate cap must be replaced with aftermarket tailgate cap provided with system.
11. If equipped w/OE tailgate step, cover must be converted to an "NT" (no tailgate lock) installation. Necessary components are included.
12. Reduces OE trunk opening to 15.5".
13. '99-'00 models require the use of eight (8) #2 Clamps.
LB = Long Bed
SB = Short Bed
XSB = Extra Short Bed
SS = Sportside |
|
Roll-N-Lock - Cargo Manager
A MUST HAVE for the Roll-N-Lock system
|
|
|
|
