|
|
|
1995.5-2004
Tacoma
Toyota moved away from their traditional torsion bar front IFS
suspension in 1995.5 and introduced a front strut assembly into
their line of SLA (Short Long A Arm) 4 wheel drive trucks. As
this new style of front suspension has become a roadblock to
other suspension manufacturers, Fabtech took this design as a
challenge and has developed and built a multitude of suspension
systems.
We have addressed Toyota’s strut assembly with two styles
of systems, replacement coil over shocks and IFS system.
Our adjustable coil over shocks replace the stock strut assembly
for a 0-3.5" lift system. If you are looking for more height,
then check out our 6" IFS Performance System with extended
length strut assemblies and heavy duty bracketry. No matter what
your height requirements, Fabtech has a system for you. |
 |
Dirt Logic 2.5 Coilovers
Built for aggressive offroad driving, this Coilover features
a 2.50" OD take apart shock with height adjustability coming
from the threaded body and performance coil spring. Offroad dampening
capacity is so superior with this Coilover we caution drivers
to not drive past the limits of the stock components of the vehicle. |
 |
Performance Coilovers
Core of this Coilover is a 2.0"
OD take apart race shock, with a fully threaded body, allowing
ride height adjustment with a performance coil spring for outstanding
offroad dampening with a good highway ride. |
 |
Basic Coilovers
System features our Performance shock absorber with a replacement
coil spring and adjustable coil seat for a good highway and offroad
ride. |
Fabtech 0-2.5" Adjustable Coilover
Systems
For 95.5-04 Tacoma PreRunner
- 6 Lug
Fabtech’s 0-3.5” Adjustable Coil-over Systems for
the Tacoma offer three front shock type choices: Fabtech Basic
Coil-over Shocks, Performance Shocks or Dirt Logic 2.5 Shocks.
Fabtech’s Performance Shocks or Dirt Logic 2.25 Shocks
are included for your rear suspension. |
| 0-3.5" Adjustable Coilover Systems (Notes:
1) |
Rear Suspension |
Order |
Footnotes:
1. Trucks with automatic locking style hub can only be lifted 0-2" in height.
3. Precision hydraulic press work required
4. Will not work w/ OEM electronically controlled shocks.
|
