|
|
|
2007 Jeep JK 4WD:
With the introduction of the 2007 Jeep JK, Fabtech announces the release of the 3” Basic system. This system utilizes the factory coil springs with 3” steel coil spacers. With the vast array of cab and motor combinations found in the JK, utilization of the factory coil springs with this system ensures that the vehicle will receive a full 3” of lift to clear 35/1250R17 tires. This system includes a replacement Pitman Arm, front and rear Trac Bar relocation brackets, Sway Bar mounts, front and rear Bump Stop mounts and more. Proper front end alignment is insured with this system due to the included adjustable alignment cams. Also included is a front driveshaft boot clamp kit to allow additional clearance between the front driveshaft and transmission during full suspension articulation. This system capitalizes on Jeep's very capable factory suspension design with the benefit of additional wheelwell clearance to run 35” tall tires for all around on and offroad performance. As an alternative to the factory small CV driveshafts we offer Heavy Duty units feature large 1310 U joints for increased strength. These driveshafts will directly replace the factory assemblies for use with the 3” Basic System. Future products from Fabtech for the JK will include a cutting edge Crawler System, Coilover Conversion system, bumpers and more. |
3" Basic System  |
Quantity |
Order |
|
2007-2008
Jeep JK Wrangler 4WD 5" Short Arm System
Features and Benefits:
- The system utilizes the factory link
arm mounts with heavy 5/16"
wall replacement links (upper and lower front and lower rear)
with rotational urethane ends for unrestricted movement.
- The Fabtech links feature adjustable ends
to enable proper caster and pinion angle adjustments.
- Replacement front and rear coil springs
feature a slightly higher spring rate while maintaining off road
flexibility.
- Front and rear trac bar relocation brackets
maintain proper axle positioning throughout the suspension travel.
- Additional weld-on trac bar brackets are
provided to reinforce weak factory axle mounting points.
- Extended length bump stop brackets, performance
shocks, sway bar links, drop pitman arm, and brake line brackets
complete the package.
|
| 5" Short
Arm System w/Performance Shocks |
Quantity |
Order |
| 5" Short
Arm System w/Dirt Logic Shocks |
Quantity |
Order |
| Optional Accessories |
Quantity |
Order |
Performance Shocks |
Fabtech Performance Shocks have
been designed to work in conjunction with each of our suspension
systems, resulting in superior ride control. Features include high
velocity 9-stage valving for excellent dampening capabilities and
a closed cell insert to reduce shock fade at high speeds.
|
 |
Dirt Logic Shocks |
Fabtech raises the bar in high
end shock absorber technology with their line of "Dirt Logic" monotube
shocks.
With the commitment to exceptional quality,
Fabtech has established an in house specialty shock division
to design and build Dirt Logic shocks for the core off road enthusiast.
Built to meticulous standards, each Dirt Logic shock is a work
of art internally and externally. From the high flow billet aluminum
piston assembly to the oversized steel body with billet end caps,
these shocks are tuned to specific applications for exceptional
performance in the most rugged conditions. |
 |
|
