|
|
 
 |
PERFORMANCE SUSPENSION SYSTEM FEATURES & BENEFITS:
- Integrated Lower Control Arm Crossmembers includes Differential Skid Plate
- Offset Ductile Iron Front Steering knuckles retain stock like turning radius with minimal increase of track width
- No disassembly of factory strut assembly required for installation
- System compatible with factory Autoride models Rack and Pinion is retained in stock position
- Full lift height for proper clearance of 35/1250R17 tires
- Rear system includes Auto Ride model specific coil springs with upper and lower tubular link arms and trac bar relocation bracket
|
6" Basic System
 6" Performance w/Dirt Logic 2.5
|
BASIC AND PERFORMANCE SYSTEM:
With an all new platform for 2007 GM Fullsize SUV's and SUT's, Fabtech has developed multiple systems that provide everything from a stock like ride up to a mega dampening offroad suspension. Common to all 2007 GM systems is Fabtech's legendary one piece high arched lower crossmember design with an integrated differential skid plate for solid support of the front suspension. Special attention was given to the design of replacement extended length steering knuckles to keep the track width of the vehicle near stock while retaining turning radius for easy maneuverability in tight areas. All rear systems feature extended length tubular upper and lower link arms with an oversized Trac bar relocation bracket to properly place the axle under the vehicle with zero driveline vibration. Auto Ride and non Auto Ride specific rear coil springs maintain proper ride height on all models. The Basic System features the above mentioned components along with front strut assembly spacers and rear performance coil springs. This system provides a stock like ride and is compatible with all Auto Ride models. Fabtech's Performance System provides the Dirt Logic 2.5 coilover front shocks for superior damping. This Performance system will provide a supple highway ride with outstanding offroad damping capabilities for the best of both worlds. Installation of all systems does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies. There are no brake lines, exhaust system, welding or driveline modifications required for installation. |
| 2" Leveling System (Notes: 2) |
Quantity |
Order |
| 6" Basic System w/Auto Ride (Notes: 1,3) |
Quantity |
Order |
| 6" Basic System w/o Auto Ride (Notes: 1,3) |
Quantity |
Order |
| 6" Performance System w/o Auto Ride (Notes: 3) |
Quantity |
Order |
FOOTNOTES:
(1) - Utilizes stock rear shocks
(2) - Some models may not be level after install
(3) - Will not fit all wheel drive models
(5) - For use with 6" systems only |
