|
|
| 
|
1988-1998
C1500 / 2500 / 3500 5 & 6 Lug
The production
of Chevrolet's new model truck in 1988 triggered an engineering
spark. From this we created a vast range of systems from our spindle
system to the Ultimate long travel system. New 4" lift spindle
designs provide the simplest installation with the least amount
of control arm modifications. Add our bolt on dual shock engine
cage and take performance to the next level. |
 |
4" Spindle System
Fabtech leads the way with the most affordable, 4" suspension
system for 1988-1999 GM C1500 trucks on the market today. Installation
is easy, just bolt on the front spindles, along with the rear blocks,
u-bolts and shocks. |
| 4"
Spindle System |
Quantity |
Order |
 |
7.5" Performance
Crossmember System
The 88-98 2WD system uses Fabtech's proven crossmember and steering
knuckle technology found in the 4 Wheel Drive IFS systems for easy
installation. The factory upper control arm remains in the stock
frame pocket attaching to a new extended length cast spindle with
the lower control arm relocated into the one piece crossmembers.
Extended length smooth ride coil springs provide increased ride height
for clearance of 35/12.50R15 tires on 15x8 wheels.Rear lift is comprised
of a 5" block and U-bolt kit. System includes extended length brake
hoses, F&R bump stop mounts and more. |
| 7.5"
Performance Crossmember System (Notes: 1,3) |
Quantity |
Order |
Footnotes:
1. Larger tires cannot be installed on OEM wheels. Aftermarket wheels with
a maximum backspacing of 3 3/4" must be used.
3. Welding required
|
