
#DT-506
|
Bully Dog
Core Series Foward & Reverse Backing Alert System
When vehicle is in reverse, 4 rear bumper sensors send out
ultrasonic waves 4 times per second that detect an obstacle
behind the vehicle up to 6 feet away. The controller receives
the signal and transmits to the LCD display which emits both
a visual and audio alert. The front sensors are always on unless
the system is reverse. If the vehicle is powered, the front
sensors send out sonar waves to detect an object up to 3 feet
away and provide a visual display alert. The front sensors
are designed to assist the driver when parking in garages or
when parallel parking.
Rear: Speaker emits long intermittent beeps when objects are
within 4 to 6 feet of the rear bumper while the vehicle is
in reverse. When the vehicle is within 1 foot or less of an
obstacle, the speaker (which includes a high and low volume
setting) sounds a continuous alert.
Front: LCD display activates when an object is within 3 feet
of front of the vehicle as long as the vehicle is on and not
in reverse.
Rear power is supplied by tapping into reverse lights; rear
system is activated only when vehicle is in reverse. Front
sensor power is tapped into accessory power and is activated
when vehicle is on.
- Front/Rear Multiple Zone Caution
- Interior Sound Warning
- LCD Display
System Includes:
Controller Unit – VFT LCD display with integrated speaker and 10’ cable – Six
21mm Sensors with 8’ rear sensor cable and 24’ front sensor cable – Drill
Bit – Owner’s Manual and Installation Guide
VFT LCD Display: Displays distance to impact with obstacles up to 6’ away
from rear and up to 3’ from front. Two color displays indicates which side
of the vehicle the obstacle is located. Speaker with high and low volume setting
sounds alert for rear obstacles.
|