HP Series Winches

HP Series Winches

The Superwinch HP Series of hydraulic winches provides you with a continuous duty solution to your winching requirements. They were designed with the toughest commercial/industrial applications in mind. Available in a full range of planetary and worm-gear drives with capabilities from 8,000 to 30,000 pounds. HP Series hydraulic winches are built to JAE 706 standards and are CE certified. When the job is on the line, look no further than Superwinch.

H8P Short Drum

The Superwinch H8P features a heavy duty, 8,000 pound capacity planetary drive hydraulic winches, engineered to ensure total reliability during recovery/winching operations. Designed to fill Vehicle Recover Operators' need for a dependable unit for flat-bed applications.

• Rated Line Pull: 8,000 lbs (3,630 kgs)
• Motor: High Torque
• Gearing: 2 stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 1,800 psi (BAR 124.13) 126.58 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Lever (Optional Pneumatic P/N 5603)
• Brake: Integral, automatic
• Rope: N/A - Recommended: Wire Rope 3/8" x 100'(10mm x 30m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5600
• Remote: N/A
• Dimensions: 25.35” L x 7.44” D x 7.44” H (584.2mm L x 209.55mm D x 228.6mm H)

• Drum Diameter: 3.5" (89mm)
• Drum Length: 7.5” (190mm)
• Mounting Bolt Pattern: Side, foot, angle, flatbed, or low mounted
• Installed Weight: 84 lbs (38 kgs) without rope
• Shipping Weight: 92 lbs (42 kgs) without rope
• Warranty: Limited One Year Warranty
• UPC: 022705505017
• Line Speed, Bottom Layer, No Load: 40 FPM

H8P Long Drum

The Superwinch H8P features a heavy duty, 8,000 pound capacity planetary drive hydraulic winches, engineered to ensure total reliability during recovery/winching operations. Designed to fill Vehicle Recover Operators' need for a dependable unit for flat-bed applications.

• Rated Line Pull: 8,000 lbs (3,630 kgs)
• Motor: High Torque
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 1800 psi (BAR 124.13) 126.58 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Lever (Optional Pneumatic P/N 5603)
• Brake: Integral, Automatic
• Rope: N/A - Recommended: 3/8" x 130' (10mm x 40m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5610A)
• Remote: N/A
• Dimensions: 25.35” L x 7.44” D x 7.44” H

• Drum Diameter: 3.5" (89mm)
• Drum Length: 12.25” (311.15mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 84 lbs (38 kgs) without Rope
• Shipping Weight: 92 lbs (42 kgs) without Rope
• Warranty: Limited One Year Warranty
• UPC: 022705506014
• Line Speed, Bottom Layer, No Load: 40 FP

H10P Short Drum

The Superwinch H10P features a heavy duty, 10,000 pound capacity planetary drive hydraulic winches, engineered to ensure total reliability during recovery/winching operations. Designed to fill Vehicle Recover Operators' need for a dependable unit for flat-bed applications.

• Rated Line Pull: 10,000 lb. (4,540kg)
• Motor: High Torque
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 1700 psi (BAR 117.24) 119.55 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Lever (Optional Pneumatic P/N 5603)
• Brake: Automatic, 100% Load Holding
• Rope: N/A - Recommended: Wire Rope 7/16" x 75' (11mm x 23m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5600)
• Remote: N/A
• Dimensions: 25.35” L x 7.44” D x 7.44” H

• Drum Diameter: 3.5" (89mm)
• Drum Length: 9” (229mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 84 lbs (38 kgs) without Rope
• Shipping Weight: 92 lbs (42 kgs) without Rope
• Warranty: Limited One Year Warranty
• UPC: 022705517010
• Line Speed, Bottom Layer, No Load: 30 FPM

H10P Long Drum

The Superwinch H10P features a heavy duty, 10,000 pound capacity planetary drive hydraulic winches, engineered to ensure total reliability during recovery/winching operations. Designed to fill Vehicle Recover Operators' need for a dependable unit for flat-bed applications.

• Rated Line Pull: 10,000 lbs (4,535 kgs)
• Motor: High Torque
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 1700 psi (BAR 117.24) 119.55 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Lever (Optional Pneumatic P/N 5603)
• Brake: Automatic, 100% Load Holding
• Rope: N/A – Recommended: Wire Rope 7/16" x 100' (11mm x 30m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5610A)
• Remote: N/A
• Dimensions: 25.35” L x 7.44” D x 7.44” H

• Drum Diameter: 3.5" (89mm)
• Drum Length: 12.25” (311.15mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 84 lbs (38 kgs) without Rope
• Shipping Weight: 92 lbs (42 kgs) without Rope
• Warranty: Limited One Year Warranty
• UPC: 022705517812
• Line Speed, Bottom Layer, No Load: 30 FPM

H11P Short Drum

The Superwinch H11P features a heavy duty, high quality 11,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 11,000 lbs (5,000 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Handle
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 7/16” x 214’ (11mm x 65.2m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5610A
• Remote: N/A
• Dimensions: 26.9” H x 10.2” D x 11.8” H (683.3mm L x 259.1mm D x 299.7mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 10” (254mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 125 lbs (56.7 kgs) without Rope
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053648
• Line Speed, Bottom Layer, No Load: 38 FPM

H11P Long Drum

The Superwinch H11P features a heavy duty, high quality 11,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 11,000 lbs (5,000 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Handle
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 7/16” x 257' (11mm x 78m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5620A
• Remote: N/A
• Dimensions: 28.3” H x 10.2” D x 11.8” H (718.8mm L x 259.1mm D x 299.7mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 11.4” (289.6 mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 127 lbs (57.6 kgs) without Rope
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053662
• Line Speed, Bottom Layer, No Load: 38 FPM

H13P Short Drum

The Superwinch H13P features a heavy duty, high quality 13,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 13,000 lbs (6,000 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Handle
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 7/16" x 214' (11mm x 65m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5610A
• Remote: N/A
• Dimensions: 26.9” H x 10.2” D x 11.8” H (683.3mm L x 259.1mm D x 299.7mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 10” (254mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 125 lbs (56.7 kgs) without Rope
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705057318
• Line Speed, Bottom Layer, No Load: 30 FPM

H13P Long Drum

The Superwinch H13P features a heavy duty, high quality 13,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 13,000 lbs (6,000 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release Handle
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 7/16” x 257' (11mm x 78m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5620A
• Remote: N/A
• Dimensions: 28.3” H x 10.2” D x 11.8” H (718.8mm L x 259.1mm D x 299.7mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 11.4” (289.6 mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 127 lbs (57.6 kgs) without Rope
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053723
• Line Speed, Bottom Layer, No Load: 30 FPM

H13P Long Drum (Pneumatic)

The Superwinch H13P features a heavy duty, high quality 13,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 13,000 lbs (6,000 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Spring Applied, Pneumatic Release
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 7/16” x 257' (11mm x 78m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5620A
• Remote: N/A
• Dimensions: 28.3” H x 10.2” D x 10.0” H (718.8mm L x 259.1mm D x 254.0mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 11.4” (289.6 mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 129 lbs (58.5 kgs) without rope
• Shipping Weight: 140 lbs (63.5 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053730
• Line Speed, Bottom Layer, No Load: 30 FPM

H15P Short Drum

The Superwinch H15P features a heavy duty, high quality 15,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 15,000 lbs (6,800 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 stage planetary
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch - Manual Release
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 1/2" x 153' (12.7mm x 47m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5610A
• Remote: N/A
• Dimensions: 26.9” H x 10.2” D x 11.8” H (683.3mm L x 259.1mm D x 299.7mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 10” (254mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 125 lbs (56.7 kgs) without Rope
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053747
• Line Speed, Bottom Layer, No Load: 27 FPM

H15P Long Drum

The Superwinch H15P features a heavy duty, high quality 15,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 15,000 lbs (6,800 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch – Manual Release
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 1/2” x 184' (12.7mm x 56m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5620A
• Remote: N/A
• Dimensions: 28.3” H x 10.2” D x 11.8” H (718.8mm L x 259.1mm D x 299.7mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 11.4” (289.6 mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 127 lbs (57.6 kgs) without Rope
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053761
• Line Speed, Bottom Layer, No Load: 27 FPM

H15P Short Drum (Pneumatic)

The Superwinch H15P features a heavy duty, high quality 15,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 15,000 lbs (6,800 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch – Pneumatic Release
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 1/2" x 153' (12.7mm x 47m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5610A
• Remote: N/A
• Dimensions: 26.9” H x 10.2” D x 10.0” H (683.3mm L x 259.1mm D x 254mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 10” (264mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 127 lbs (57.6 kgs)
• Shipping Weight: 138 lbs (63 kgs)
• Warranty: Limited One Year Warranty
• UPC: TBA
• Line Speed, Bottom Layer, No Load: 27 FPM

H15P Long Drum (Pneumatic)

The Superwinch H15P features a heavy duty, high quality 15,000 lb capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications. Robust construction engineered to meet J706 standards.

• Rated Line Pull: 15,000 lbs (6,800 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: 2 Stage Planetary Differential
• Gear Ratio: 16:1
• Maximum Oil Pressure: 2,000 psi (BAR 137.93) 140.65 kg/cm
• Maximum Oil Flow: 15 gpm (57 l/min)
• Clutch: Free-Spooling Clutch – Pneumatic Release
• Brake: Integral, Spring Applied, Hydraulic Released, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 1/2” x 184' (12.7mm x 56m)
• Fairlead: N/A, Optional Roller Fairlead P/N 5620A
• Remote: N/A
• Dimensions: 28.3” H x 10.2” D x 10.0” H (718.8mm L x 259.1mm D x 254.0mm H)

• Drum Diameter: 4.0" (102mm)
• Drum Length: 11.4” (289.6 mm)
• Mounting Bolt Pattern: Side, Foot, Angle, Flatbed, or Low Mounted
• Installed Weight: 129 lbs (58.5 kgs) without Rope
• Shipping Weight: 140 lbs (63.5 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705053778
• Line Speed, Bottom Layer, No Load: 27 FPM

H20P

The Superwinch H20P features a heavy duty, high quality 20,000 lb. capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications.

• Rated Line Pull: 20,000 lbs (9,080 kgs)
• Motor: Rugged, High Torque Motor Unit of Proven Reliability
• Gearing: Heavy Duty, High Efficiency 2 Stage Planetary Gearbox Giving Optimum Reliability
• Gear Ratio: 36:1
• Maximum Oil Pressure: 2,500 psi (172 bar) 175.81 kg/cm
• Maximum Oil Flow: 20 gpm (75 l/min)
• Clutch: Spring Applied, Manual Free-Spooling Release
• Brake: Multi-disc Type Brake, Spring Applied, Hydraulic Release, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 5/8" x 250' (16mm x 70m) or 3/4" x 160' (20mm x 48.76m)
• Fairlead: N/A
• Remote: N/A
• Dimensions: 37” L x 16” D x 16” H (940mm L x 406mm D x 406mm H)

• Drum Diameter: 7.5" (190.5mm)
• Drum Length: 11.69” (296.93mm)
• Mounting Bolt Pattern: Foot, Flatbed, or Low Mounted
• Installed Weight: 436 lbs (198 kgs)
• Shipping Weight: 525 lbs (238.14 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705544030
• Line Speed, Bottom Layer, No Load: 34 FPM

H20P (Pneumatic)

The Superwinch H20P features a heavy duty, high quality 20,000 lb. capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications.

• Rated Line Pull: 20,000 lbs (9,080 kgs)
• Motor: Rugged, High Torque, Low Speed Motor Unit of Proven Reliability
• Gearing: Heavy Duty, High Efficiency 2 Stage Planetary Gearbox Giving Optimum Reliability
• Gear Ratio: 36:1
• Maximum Oil Pressure: 2,500 psi (172 bar) 175.81 kg/cm
• Maximum Oil Flow: 20 gpm (75 l/min)
• Clutch: Spring Applied, Manual Free-Spooling Release
• Brake: Multi-disc Type Brake, Spring Applied, Hydraulic Release, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 5/8" x 250' (16mm x 70m) or 3/4" x 160' (20mm x 48.76m)
• Fairlead: N/A
• Remote: N/A
• Dimensions: 37” L x 16” D x 16” H (940mm L x 406mm D x 406mm H)

• Drum Diameter: 7.5" (190.5mm)
• Drum Length: 10.0" (254mm)
• Mounting Bolt Pattern: Foot, Flatbed, or Low Mounted
• Installed Weight: 436 lbs (198 kgs)
• Shipping Weight: 525 lbs (238 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705544023
• Line Speed, Bottom Layer, No Load: 34 FPM

H25P

The Superwinch H25P features a heavy duty, high quality 25,000 lb. capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications.

• Rated Line Pull: 25,000 lbs (11,340 kgs)
• Motor: Rugged, High Torque, Low Speed Motor Unit of Proven Reliability
• Gearing: Heavy Duty, High Efficiency 2 Stage Planetary Gearbox Giving Optimum Reliability
• Gear Ratio: 36:1
• Maximum Oil Pressure: 2,500 psi (172 bar) 175.81 kg/cm
• Maximum Oil Flow: 20 gpm (75 l/min)
• Clutch: Spring Applied, Manual Free-Spooling Release
• Brake: Multi-disc Type Brake, Spring Applied, Hydraulic Release, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 11/16" x 250' (17.4mm x 70m) or 3/4" x 160' (20mm x 48.76m)
• Fairlead: N/A
• Remote: N/A
• Dimensions: 37” L x 16” D x 16” H (940mm L x 406mm D x 406mm H)

• Drum Diameter: 7.5" (190.5mm)
• Drum Length: 10.0” (254mm)
• Mounting Bolt Pattern: Foot, Flatbed, or Low Mounted
• Installed Weight: 436 lbs (198 kgs) without Rope and Fairlead
• Shipping Weight: 525 lbs (238 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705545037
• Line Speed, Bottom Layer, No Load: 28 FPM

H25P Pneumatic

The Superwinch H25P features a heavy duty, high quality 25,000 lb. capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications.

• Rated Line Pull: 25,000 lbs (11,340 kgs)
• Motor: Rugged, high torque, low speed motor unit of proven reliability
• Gearing: Heavy Duty, High Efficiency 2 Stage Planetary Gearbox Giving Optimum Reliability
• Gear Ratio: 36:1
• Maximum Oil Pressure: 2,500 psi (172 bar) 175.81 kg/cm
• Maximum Oil Flow: 20 gpm (75 l/min)
• Clutch: Spring Applied, Pneumatic Free-Spooling Release
• Brake: Multi-disc Type Brake, Spring Applied, Hydraulic Release, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 11/16" x 250' (17.4mm x 70m) or 3/4" x 160' (20mm x 48.76m)
• Fairlead: N/A
• Remote: N/A
• Dimensions: 37” L x 16” D x 16” H (940mm L x 406mm D x 406mm H)

• Drum Diameter: 7.5" (190.5mm)
• Drum Length: 11.69” (296.93mm)
• Mounting Bolt Pattern: foot, flatbed, or low mounted
• Installed Weight: 436 lbs (198 kgs) without rope and fairlead
• Shipping Weight: 525 lbs (238 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705545020
• Line Speed, Bottom Layer, No Load: 28 FPM

H30P

The Superwinch H30P features a heavy duty, high quality 30,000 lb. capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications.

• Rated Line Pull: 30,000 lbs (13,610 kgs)
• Motor: Rugged, High Torque, Low Speed Motor Unit of Proven Reliability
• Gearing: Heavy Duty, High Efficiency 2 Stage Planetary Gearbox Giving Optimum Reliability
• Gear Ratio: 36:1
• Maximum Oil Pressure: 2,500 psi (172 bar) 175.81 kg/cm
• Maximum Oil Flow: 20 gpm (75 l/min)
• Clutch: Spring Applied, Manual Free-Spooling Release
• Brake: Multi-disc Type Brake, Spring Applied, Hydraulic Release, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 3/4" x 160' (20mm x 48.76m) or 5/8" x 250' (16mm x 76.2m)
• Fairlead: N/A
• Remote: N/A
• Dimensions: 37” L x 16” D x 16” H (940mm L x 406mm D x 406mm H)

• Drum Diameter: 7.5" (190.5mm)
• Drum Length: 11.69” (296.93mm)
• Mounting Bolt Pattern: Foot, Flatbed, or Low Mounted
• Installed Weight: 436 lbs (198 kgs) without Rope and Fairlead
• Shipping Weight: TBA
• Warranty: Limited One Year Warranty
• UPC: 022705546034
• Line Speed, Bottom Layer, No Load: 23 FPM

H30P Pneumatic

The Superwinch H30P features a heavy duty, high quality 30,000 lb. capacity planetary drive hydraulic winch, engineered to ensure total reliability during recovery/winching operations. Designed to fill the professional Vehicle Recover Operators' need for a dependable, heavy-duty unit for a wide range of applications.

• Rated Line Pull: 30,000 lbs (13,610 kgs)
• Motor: Rugged, High Torque, Low Speed Motor Unit of Proven Reliability
• Gearing: Heavy Duty, High Efficiency 2 Stage Planetary Gearbox Giving Optimum Reliability
• Gear Ratio: 36:1
• Maximum Oil Pressure: 2,500 psi (172 bar) 175.81 kg/cm
• Maximum Oil Flow: 20 gpm (75 l/min)
• Clutch: Spring Applied, Manual Free-Spooling Release
• Brake: Multi-disc Type Brake, Spring Applied, Hydraulic Release, Full Load Holding
• Rope: N/A – Recommended: Wire Rope 3/4" x 160' (20mm x 48.76m) or 5/8" x 250' (16mm x 76.2m)
• Fairlead: N/A
• Remote: N/A
• Dimensions: 37” L x 16” D x 16” H (940mm L x 406mm D x 406mm H)

• Drum Diameter: 7.5" (190.5mm)
• Drum Length: 11.69” (296.93mm)
• Mounting Bolt Pattern: Foot, Flatbed, or Low Mounted
• Installed Weight: 436 lbs (198 kgs) without Rope and Fairlead
• Shipping Weight: 525 lbs (238 kgs)
• Warranty: Limited One Year Warranty
• UPC: 022705546027
• Line Speed, Bottom Layer, No Load: 23 FPM