-
Fits standard 2 5/16" gooseneck ball hitch.
-
24,000 lb. trailer GVWR
-
6,000 lb. tongue
weight.
-
3" vertical adjustment.
-
Kit includes all hardware for attachment
to 5th wheel trailer.
-
Easy installation
-
Only adapter with remote coupler release.
-
Only V19 adapter on the market.
|
Ranch
Hitch Adapter
If you want to pull a 5th wheel trailer but don’t
want to lose your truck bed to a bulky 5th wheel hitch, we have
the solution for you! You can use any standard gooseneck hitch
in your truck bed with our Ranch Hitch Adapter attached to the
trailer.
The Ranch Hitch Adapter is the only 5th wheel to
gooseneck adapter on the market that is V19 Certified – the
strongest safety certification available for gooseneck connections.
It can pull a trailer weighing up to 24,000 lbs. with 6,000 lbs
tongue weight.
The Ranch Hitch Adapter is very easy to use. Most
gooseneck receivers require you to get into the bed of your truck
to latch the coupler; not so with the Ranch Hitch Adapter. The
remote cable mechanism allows you to engage and release the coupler
while standing on the ground outside your pickup. The bell shaped
receiver allows for the hitch ball and adapter to be as much as
3" off center, and still slide into place correctly.
Our Ranch Hitch Adapter is quick and easy to install
(see
instructions). The installation is simple and takes roughly
an hour to complete. To see if the adapter will fit your
5th wheel, do the following: Back your truck into position to hook
up your 5th wheel. Measure from the "pin plate" (the bottom of
the pin box) down to the top of the ball in the bed of your truck.
When the adapter is fully compressed that measurement is11 3/4".
It has 3" of adjustment, so when it is fully extended that measurement
will be 14 3/4". You should have 5" or 6" of clearance between
the over-hang and the sideboards of your truck, keeping in mind
your 5th wheel should be level for traveling.
|
