TS Performance PowerFool2
TS Performance introduces the first Dual
Stage Computer Controlled Nitrous System.
The PowerFool2 was designed especially
for the diesel applications. All wiring and solenoids are
self contained in 2 boxes and are equipped with all the necessary
hardware and fittings.
System Includes:
- Computer Controlled Command Center.
- Self Contained Solenoid Box.
- Plug in Wiring Harness.
- Weather Pack connectors.
- Wide-Open Throttle Switch.
- Braided Nylon Nitrous Lines and fittings.
- 2 Nitrous Nozzles.
- 2 Nitrous Jets.
- 10lb. Nitrous Bottle
- Bottle Bracket.
The PowerFool 2 makes Nitrous simple and takes away the
entire headache of wiring. This system can be installed in
numerous places, so if you have your own idea on an application
that you would like to use you can. The PowerFool2 has many
different applications that can be applied, such as the placement
and the locations of your nozzles and the amount of Nitrous
you would like to spray. This application can be used even
if you have NOT O-ringed your heads. If you have stock heads
the amount of Nitrous being sprayed should be limited.
When using the Powerfool2 we recommend using a custom burned chip that will aid
in gaining the best results.
CAUTION! This system has the capability of
producing up to 300hp and should be used in accordance to
your application. If you have never used Nitrous before because
of the fear factor you can now enjoy the added power without
the confusion and stress that usually accompanies this feared
power enhancer.
|
